DESCRIPTION
The high speed photo-receiv
er receiver evaluation board consist of the key module, MPRV133xA, which is a differential front-end with high differential gain and a typical bandwidth of 36GHz.The photo-receiver module contains waveguide-integrated PIN photodiode (PD) and a single chip and limiting amplifier (LA) with limiting output buffer. The incorporated blocking capacitors enable AC output coupling. The battery powered design makes the EVB ideal for Lab use, which minimizes the noise.
FEATURES
Sensitivity, -10dBm typical, O, C&L Band
Typical 36GHz 3dB cut-off frequency
1200mVpp differential output voltage
Replaceable battery power supply
Trans-impedance amplifier elimination optional
APPLICATIONS
43Gbps Optical Transceiver
Radio Over Fiber
Testing and Measurement
| Parameters | Unit | Parameter | ||
| Min. | Typ. | Max. | ||
| Operating Wavelength | nm | 1300 | 1310, 1550 | 1620 |
| 3dB Bandwidth | GHz | 30 | 36 | – |
| Optical Input Power Range | dBm | -10 | -3 | +3 |
| Differential Conversion Gain | V/W | 400 | 1200 | – |
| Maximum Output Voltage Swing | mVpp | – | 900 | 1200 |
| Photodiode DC Responsivity | A/W | 0.4 | 0.6 | – |
| Bit rate | Gbps | – | 40 | – |
| Sensetivity | dBm | Typ. -12(@1550nm); -7(@1310nm) | ||
| Equivalent input noise density | pA/√Hz | – | 18 | 25 |
| Photodiode dark current/PD | nA | – | 10 | 1000 |
| PD Bias and Amplifier | V | 3.135 | 3.3 | 3.465 |
| Optical Overload | dBm | +3 | +4.6 | – |
| Trans-Impedance Amplifier Elimination | – | Optional | ||
| Signal Output and Couple | – | Differential, AC Coupled | ||
| RF Output Port | – | GPPO Malex2 | ||
| Optical Fiber and Connector | – | SM28-e, FC/APC or LC/PC | ||
| Operating Temperature | ℃ | 0 ~50 | ||
| Power supply* | – | Battery AAx2, 3.2V (EVB) | ||
| Dimensions (L×W×H)* | mm | 84×79×15 (EVB) | ||
Note: *The specifications subject to change without notice.
*The appearance and the key component varies according to different performance requirements.
Order Information
