40Gbps DQPSK Integrated Receiver, Fujitsu FIM24202, Fiber Coupled Module


40Gbps DQPSK Integrated Receiver, Fujitsu FIM24202, Fiber Coupled Module

The Fujitsu FIM24202 DQPSK receiver integrates balanced PIN/TIA (Linear + AGC) photo receiver and DLI (Delay Line Interferometer) in one package, which make the module compact and cost-effective with excellent performances. The interior PLC Mach-Zehnder interferometer features push/pull drive of DLI phase tuning for lower power consumption. And the Balanced receiver consist of PIN, TIA and peak detector for each channel, which is easy for tuning and debugging. All the components are hermetically sealed in high reliable package. It is designed for 40Gbps DQPSK optical communication systems.

Features

  • 3dB cut-off frequency: 20 GHz typ.
  • Power consumption <3.5W target
  • Small Size: 45mm x 27mm x 8.0mm max.
  • Flexible Printed Cable (FPC) interface
  • Optical Input power monitor

Applications

  • 44.6Gbit/s DQPSK optical communication systems
  • MSA Transponder and Line card designs

Block Diagram

Optical   Characteristics

Parameter Units Min Typ. Max Notes
Wavelength Range nm 1527 1565
Optical Input Power dBm 4.5 10.5
Extinction Ratio dB 17
Optical Path Delay(P/N) ps -2 – +2 Differential Output Same Arm
Optical Path Delay(I/Q) ps -3 – +3 Between I –arm and Q-arm
FSR GHz – 22.8 –
FSR Error GHz – ±1
Phase Tuning Range FSR -1 – +1
Phase Tuning Voltage V – 6.5 8.0 MZI_I1±, MZI_Q1± MZI_I2±, MZI_Q2±
Phase Tuning Resistance Ohms – 60 –
Phase Tuning Time Constant* mSec – 50 –
Optical Return Loss dB 27 – –
*Tuning time constant is defined as the time for the phase to reach half way from the starting point to the ending point.

Electrical   Characteristics

Parameter Units Min Typ. Max Motes
PD Responsivity** A/W 0.075 0.15 Receiver Total
A/W 0.01 – 0.1 Monitor PD
Bit Rate Gbps – 44.6 –
Conversion Gain Vpp/W – 150 – Not AGC Mode
Electrical Output Reflection Coefficient (S22) dB – 10 – @<20GHz
Input Referred Noise Current Density pA/sqrt(Hz) – 15 – @TIA
Photodiode Dark Current uA – 3 –
Power Consumption W 2.0 – 3.5 In Total
Thermistor Resistance Kohms – 10 –
Thermistor B Constant K – 3410 –
Output Voltage Swing mVpp – 400 – AGC Mode, Terminate to GND through 50 Ohms
3dB Cut-off Frequency GHz – 20 –
Amplifier Supply Current mA – 110 135 In Total
Thermistor Current mA – 0125 –
TEC Resistance Ohm – 3.75 –
TEC Control Time Constant Sec – 13 –
**Including demodulator and optical coupling Loss.