DESCRIPTION
The Module is a photo-receiver module designed for RF over Fiber, and broadband RF transmission or digital telecommunication using single mode optical fiber. The module utilizes a high input power, low distortion PIN photodiode and Unlimited linear TIA that provides optical to RF conversion out to the frequency range beyond 10 GHz. This compact, cost-effective receiver module offers dual power supply, which means Adapter or Battery supply is switchable. Its ease of use makes it ideal for Labs and Research.
FEATURE
• Wide Wavelength Range, O, C&L Band
• 3dB Bandwidth, Typical 10GHz
APPLICATION
- RZ, NRZ format, up to 10GHz
- Low Distortion Analog Links
- Testing and Measurement
SPECIFICATION
| Parameter | Unit | Min. | Max. |
| 3dB Cut-off Frequency | Hz | 30K | 10G |
| Operating Wavelength | nm | 1250 | 1600 |
| Optical Input Power Range | dBm | -18 | +2 |
| Maximum Output Voltage | V | – | 1.0 |
| Photo-diode Responsivity | A/W | 0.7 | 0.8 |
| Photo-diode Dark Current (25Deg.C) | nA | – | 1 |
| Transimpedance | Ohms | 400 | 600 |
| Linear Input Range | dBm | – | 0 |
| Average Equivalent Input Noise | pA/rt Hz | 13 | 18 |
| Signal Output and Couple | – | 50Ω, AC Coupled | |
| RF Output Port | – | 2.92mm, K Type, Female | |
| Optical Fiber and Connector | – | SM28-e, FC/APC | |
| Operating Temperature | ℃ | 0 ~50 | |
| Power supply* | – | Adapter DC 5V/0.5A | |
| Dimensions (L×W×H)* | mm | 100×80×20 |
ORDER INFORMATION
RX-PD-1-2-3-4-5
| 1 | 2 | 3 | 4 | 5 | 6 |
| Package | Bandwidth | Wavelength | TIA | Electrical Interface | Connector |
| M=Module | 10=10GHz | C=C band | T=TIA | A=AC Coupled | FA=FC/APC |
| O=O band | X=No TIA |
