Electro-Optical Instrument

20180408_181413 - Copy — DESCRIPTION The high speed photo-receiver Module consist of the key module, high speed PIN-TIA receiver, which is a differential front-end with high differential gain and a typical bandwidth of 36GHz.The photo-receiver module contains waveguide-integrated PIN photodiode (PD) and a single chip and limiting amplifier (LA) with limiting output buffer. The […]

40Gbps PIN-TIA Receiver, Fiber Coupled Photo-Detector

Tunable Laser Source — 1250~1650nm Low Degree of Polarization(Polarizaion Extinction Ratio) ASE Wide Spectrum Light Souce The wide spectrum light source consists of wide-spectrum optical semiconductor Lasers. Spontaneous emission produced by energy level transition amplified by the semiconductor Laser is to generate an ultra- broadband spectrum. Different band can be combined to provide various operating spectrum, […]

Low DOP/PER ASE Light Souce, 1250~1650nm, Ultra-wide Spectrum

Narrow Linewidth Laser Module -mini — DESCRIPTION The narrow line width module is compact laser modules employing the high-performance compact Distributed Bragg Reflection (DBR) Cavity Fiber Laser, which features mode-hop free and very narrow linewidth. It provides a stable, easy-to-use, low cost alternative to other ECL lasers. The module uses reliable, qualified and industry proven […]

Narrow Line-width Fiber Laser, 1k~3kHz, 20~500mW, C-band, Low Noise

Tunable Laser Source — The swept tunable Laser source is based on advanced electrically pumped VCSEL (Vertical Cavity Surface Emitting Laser) technology. It is an attractive laser for FBG distributed fiber sensing, which synchronous scan rate is up to 200Hz. And the free scan rate can reach 100kHz without synchronous signal output. The swept […]

Swept Tunable Laser Source, 1546nm~1554nm, Resolution 8pm, 20mW, 100kHz, High ...

Tunable Laser Source — The fiber coupled Laser source supports any of visible light wavelengths including 405, 450, 488, 520, 532, 638, 660, 670, 685nm and even near-infrared wavelengths including 785, 808, 830, 850. The Laser source consists of fiber coupled semiconductor Laser diode and temperature stabilizer, which ensure stable output power, spectrum and […]

Visible and Infrared Laser Source, 405nm~940nm Optional, Fiber Coupled

PAM4 BERT -mini — The 400Gbps Bit Error Ratio Tester (BERTWaveE856F) is a 8-lane and multi-rate high performance bit error analyzer supporting FEC. It provides 8-lane bit error test simultaneously, with each lane supporting multi -baud-ratio PAM4 signal from 14.06GBd to 28.90GBd,and diverse code pattern. It also supports the user-defined code patterns, output signal […]

8x50Gpbs Bit Error Ratio Tester, BERTWave E856F, 25GBaud PAM4 Data ...

DPIQ benchtop — DESCRIPTION The coherent receiver is an O/E evaluation equipment designed to convert DP-QPSK / BPSK / xQAM optical data to differential electrical signals. It consists of integrated coherent receiver module, power and control board. The receiver offers several user-adjustable characteristics such as RF gain, PD bias, and mode of operation, […]

Coherent Receiver, Bench-top, IQ/QPSK/xQAM/BPSK Multi-Format

EA Modulator - mini — DESCRIPTION The Electro-Absorption Modulator module consists of electro-absorption modulator with built-in cooler. The modulation signal is applied to the modulator while the CW laser propagating through electro-absorber allowing low wavelength chirping. The module includes an thermistor and a thermo-electric cooler to stabilize the performances. It is polarization maintaining fiber coupled. […]

40Gbps Electro-Absorption Modulator Module, EAM, 1550nm, C Band

DML Module mini — 10GHz Directly Modulated Laser Module, 1550 or 1310nm, DML The directly-modulated laser (DML) is a cost-effective solution for 10Gbps digital transmission of up to 60 km using traditional intra-city SMF-28 single-mode fiber links. Or It is also suited for analog fiber transmission. The package contains a high-speed DFB laser chip, […]

10GHz Direct Modulation DFB Transmitter, 1550 or 1310nm

Top -mini — DESCRIPTION The NRZ transmitter module consists of InP Mach Zehnder Modulator and conventional Distributed Feed-Back (DFB) laser. The modulation signal is applied to the integrated MZM modulator while the laser works in CW mode. The internal thermal and power control make the wavelength and optical power highly stable. And non-drifting […]

40Gbps InP MZM Transmitter, NRZ, 1550nm

Bench-Top - mini — DESCRIPTION The optical MZM (Mach-Zehnder Modulator) transmitter is a high performance modulation evaluation unit that allows user to produce optical signals with complex modulation schemes (NRZ, OOK, PSK). And PAM4 performance is an option available upon request. It integrates high bandwidth optical modulator capable of dealing with data rate up […]

MZM Transmitter, PAM4/NRZ/OOK/RZ/BPSK/DPSK/ODB/Pulse Multi-format

Bench-Top - mini — DESCRIPTION The IQ/QAM Transmitter is a high performance modulation evaluation unit that allows user to produce optical signals with complex modulation schemes (QPSK, QAM, OFDM). It integrates high bandwidth dual parallel Mach-Zehnder modulator and high speed RF drivers capable of dealing with data rate up to 56 Gbps. It features […]

Single Polarization IQ/QAM Transmitter, QPSK/xQAM Multi-format

DPIQ Benchtop — DESCRIPTION The dual polarization IQ/QAM Transmitter is a high performance modulation evaluation unit that allows user to produce optical signals with complex modulation schemes (PM-QPSK, QAM, OFDM). It integrates high bandwidth PM-QPSK modulator and high speed RF drivers capable of dealing with data rate up to 128 Gbps. It features […]

Dual Polarization IQ/QAM Transmitter, QPSK/xQAM Multi-format

EDFA - Bench-top — DESCRIPTION The DFRA (Distributed Fiber Raman Amplifier), adopts unique design to produce Distributed signal gain and flat output power while maintaining low noise figure, enabling test capabilities in system or component level manufacturing and characterization, as well as facilitating highly demanding R&D applications. The turnkey bench-top unit incorporates an user-friendly […]

Distributed Fiber Raman Amplifier, C or L Band

EDFA - Bench-top — DESCRIPTION The YDFA adopts unique design to produce maximum signal gain and saturated output power while maintaining low noise figure, enabling test capabilities in system or component level manufacturing and characterization, as well as facilitating highly demanding R&D applications. The turnkey bench-top unit incorporates an user-friendly front panel housing with […]

Ytterbium-Doped Fiber Amplifier, 1060nm YDFA, Flatten Gain, 1030nm~1080nm

EDFA - Bench-top — DESCRIPTION The EDFA adopts unique design to produce maximum signal gain and saturated output power while maintaining low noise figure, enabling test capabilities in system or component level manufacturing and characterization, as well as facilitating highly demanding R&D applications. The turnkey bench-top unit incorporates an user-friendly front panel housing with […]

Erbium-Doped Fiber Amplifier, L-band EDFA, Flatten Gain

20180408_181413 - Copy — DESCRIPTION The Module is a photo-receiver module designed for RF over Fiber, and broadband RF transmission or digital telecommunication using single mode optical fiber. The module utilizes a high input power, low distortion PIN photodiode and Unlimited linear TIA that provides optical to RF conversion out to the frequency range […]

10Gbps Analog PIN-TIA Receiver, Linear, Fiber Coupled Photo-Receiver

APD-mini — DESCRIPTION The Avalanche Photo-Diode Receiver Module consists of a key Oclaro’s avalanche photo-receiver, which integrate a low-noise preamplifier and a precision NTC thermistor in a hermetic coplanar package. Differential outputs are provided to improve noise rejection for enhanced sensitivity. It has been optimized for use in 10Gb/s metro applications, using […]

10Gbps APD-TIA Receiver, Fiber Coupled Photo-Detector

10G PIN-TIA PD -mini — DESCRIPTION The PIN-TIA (Trans-Impedance Amplifier ) Photo-Diode Receiver Module consists of a key Oclaro’s InGaAs PIN photodiode and a low-noise mid-gain limiting preamplifier in a hermetic package. Differential outputs are provided to improve noise rejection for enhanced performance. It has been optimized for use in 10Gb/s metro or long-haul applications, […]

10Gbps PIN-TIA Receiver, Fiber Coupled Photo-Detector

FIM24202mini — 40Gbps DQPSK Integrated Receiver, Fujitsu FIM24202, Fiber Coupled Module The Fujitsu FIM24202 DQPSK receiver integrates balanced PIN/TIA (Linear + AGC) photo receiver and DLI (Delay Line Interferometer) in one package, which make the module compact and cost-effective with excellent performances. The interior PLC Mach-Zehnder interferometer features push/pull drive of DLI […]

40Gbps DQPSK Integrated Receiver, Fujitsu FIM24202, Fiber Coupled Module