Butterfly Package LD Driver Module with Modulation for DFB, SOA, Pump, in Touch Screen


DESCRIPTION

The laser diode driver consists of four sections: LD bias, back PD current monitor and temperature stabilizer, and voltage-to-current convertor which allows modulation up to 100kHz. It is  suited for 10-pin or 14-pin butterfly packaged Pump, DFB, SOA, SLED or equivalent. A 4.3-inch touch screen (Optional) make it very easy of use for green hand, and the UART serial comm. port is ideal for OEM or industrial test. The butterfly packaged laser is removable. It saves a lot if users want another power or wavelength of laser source. They only need to replace the LD. ORLD-1200SA

Features

– Up to 1.2A Driving Current, Easy Remount

– High Temperature and Wavelength Stability

– Current Modulation up to 100kHz, High Cost-effective

Applications

– Fiber Laser System

– Rare Earth Doped Fiber Amplifier

– Research and Laboratory Applications

Specification

Parameter Unit Min. Typ. Max.
Current Range mA 0 800 1200
Current Resolution mA 1
Current Step mA 1 10 50
Driving Voltage V (Self-adaptive)
Modulation Signal Frequency Hz DC 100k
Modulation Signal Range Vpp 0 2.5
Current Conversion Coefficient mA/V 50 100 500
Temperature Accuracy ±0.1 ±0.2
Temperature Resolution 0.1
Temperature Range 15 25 45
Touch Screen(Optional) 4.3”, True Color TFT
Operating Temperature 0 ~ 50
Storage Temperature -20 ~ 70
Relative Humidity % 20~90 (Non-condensation)
Power supply* DC 5V, 4A (Module)
Dimensions  (L×W×H)* mm 160×135×60 (Module)

Note: *The specifications subject to change without notice

Order Information

LD-DRV- 1-2-3-4-5-6-7
1 2 3 4 5 6 7
Package Driving Capability Option1 Option2 Option3 Fiber Type Connector
M=Module 40=400mW SCR=Touch Screen P= Pump H=Half Heat Sink S=SM fiber X= N.A.
75=750mW A=SOA P=PM fiber FA=FC/APC
01=10mW D=DFB N=No LD N=No LD