E2560 Series
The E2560-series EML is designed for 10 Gb/s DWDM or TDM transmission applications. The EML integrates a CW laser with an electro-absorptive modulator in the same semiconductor chip and are an extension of CyOptics’ existing E2500-series of devices. These devices can replace external modulators that are often bulkier, more expensive, […]

10Gbps EML Module, CyOptics E2560 Series, Electro-absorption Modulated Laser, C-band

fujitsu-fim24706-img1
The coherent receiver module FIM24706 consists of an integrated polarization beam splitter and four balanced photo-receivers monolithically integrated with optical 90° hybrids. The receiver is a fully differential optical front-end suited for 128Gbps DP-QPSK applications featuring high linearity and high common mode rejection ratio. The optical 90° hybrids demodulate the […]

100Gbps Coherent DP-QPSK Receiver, Fujitsu FIM24706, PBS and Hybrid Integrated

LAN-WDM - mini
DESCRIPTION The LAN-WDM Laser source consists of four wavelengths: 1295.56, 1300.05, 1304.58, and 1309.14 nm. Wavelength is temperature stabilized. The DFB LAN-WDM Laser source assists in the development and manufacturing of active or passive LAN WDM devices for LR and ER interconnect transmission using PAM4 for 100 Gigabit Ethernet (GbE), […]

LAN WDM Laser Source, 1295/1300/1304/1309nm, DFB

Lucent 2623NA - overview
Features Ti-diffusion process Single-drive technology C- and L-band models Slim, hermetic package Bandwidths up to 10 GHz Operational over a temperature range of 0 °C to 70 °C 43 W design for minimal electrical reflections Angled interfaces for minimal optical reflections Integrated optical attenuator available on 10 Gbits/s modulator (2623NA) […]

10Gbps Intensity Modulator, Lucent or Agere 2623NA

BPRV212xA-2
The balanced photo-receiver receiver evaluation board consist of the key module,  BPRV212x(A), which is a differential front-end for 43Gbits/s DPSK-applications featuring high differential gain. The photo-receiver module contains two waveguide-integrated PIN photodiode (PD) and a single chip and limiting amplifier (LA) within one small form factor SMD-package. The Receiver is […]

Balanced Photo-Diode Receiver Evaluation Board, C&L band, 40Gbps

111
The Modulator Integrated DFB Laser (MI DFB Laser) has an electro-absorption modulator monolithically integrated with a conventional Distributed Feed-Back (DFB) laser. The modulation voltage is applied to the modulator section while the laser section operates CW allowing extremely low wavelength chirping. Extinction ratios of more than 10 dB can be […]

10Gbps EML Module, Eudyna FLD5F20NP, C-Band Electro-absorption Modulated Laser

shf-as824
No. RF Driver / Amplifier Appearance Application Remark 1 Inphi 2514DZ 25Gbps DQPSK LN Differential Modulator Driver,  GPPO, Single Input, Differential Output, Max. 8Vpp, 25Gbps Band-width, 2 SHF AS824-2-K1 or SHF AS824-1-K1, 40Gbps Transponder, LN Modulator Driver, and EM/DM Laser Driver, 40Gbps, Single Input and Output, GPPO 3 SHF S100 40Gbps […]

RF Driver / Amplifier for Equipment, Instrument, Module, Card Repair

MTX510EW -1
The MTX510EW electro-absorption modulated laser (EML) module consists of a multi-quantum-well DFB laser device with 1550nm nominal emission and a monolithically integrated electro-absorption (EA) modulator in a 7-pin, hermetically-sealed package with a GPO connector. State-of-the-art, epoxy-free laser-welding is utilized. The laser module also contains a thermoelectric cooler and a monitor […]

10Gbps EML Module, Multiplex MTX510EW, C-Band Electro-absorption Modulated Laser

md1s4v1m-demux-overview
40Gbps 1:4 Demultiplexer Module, Centellax MD1S4V1M, Agilent N4983A-D40 The MD1S4V1M is a 1:4 demultiplexer. The module accepts input data rates from 2.6 to 44 Gb/s with an input sensitivity less than 200mV-se. Differential data inputs are DC coupled and terminated with 50 ohm resistors to minimize reflections. The single-ended, half […]

1:4 Demultiplexer, 40Gbps, Centellax MD1S4V1M, Agilent N4983A-D40

EAM Laser Transmitter-1
The EML (Electro-absorption Modulated  Laser) transmitter evaluation board consists of a conventional Distributed Feed-Back (DFB) laser and EA modulator. The modulation signal is applied to the modulator section while the laser section operates CW allowing extremely low wavelength chirping. The module includes an optical isolator, monitor photodiode, thermistor and a […]

EML Optical Transmitter, 10G/40Gbps Electro-absorption Modulated Laser

MTX310EW
The MTX310EW electro-absorption modulated laser (EML) module consists of a multi-quantum-well DFB laser device with 1310nm nominal emission and a monolithically integrated electro-absorption (EA) modulator in a 7-pin, hermetically-sealed package with a GPO connector. State-of-the-art, epoxy-free laser-welding is utilized. The laser module also contains a thermoelectric cooler and a monitor […]

10Gbps EML Module, Multiplex MTX310EW, 1310nm Electro-absorption Modulated Laser

ms4s1v1m-4x10g-mux-overview
40Gbps 4:1 Multiplexer Module, Centellax MS4S1V1M, Agilent N4983A-M40 MS4S1V1M is a broadband 4 to 1 MUX with continuous coverage from 2 to 44 Gb/s. The four quarter-rate data inputs are single-ended and AC-coupled, while the full-rate data output is fully differential and DC-coupled. The MUX accepts a half-rate input clock […]

4:1 Multiplexer, 40Gbps, Centellax MS4S1V1M, Agilent N4983A-M40

MZM EVB -mini
Optical MZM Transmitter Evaluation Board DESCRIPTION The optical MZM (Mach-Zehnder Modulator) transmitter is a high performance modulation evaluation unit that allows user to produce optical signals with complex modulation schemes (NRZ, OOK, PSK). And PAM4 performance is an option available upon request. It integrates high bandwidth optical modulator capable of […]

NRZ/OOK/BPSK/DPSK/PAM4 Transmitter Evaluation Board, MZ Modulated Transmitter

agere-d1861a-overview
The 1861 directly-modulated laser (DML) is a cost-effective solution for 10 Gb/s digital transmission of up to 60 km using traditional intra-city SMF-28Ô single-mode fiber links. The 1310 nm wavelength eliminates the concern about dispersion control over most installed intra-city fiber plants. The package contains a high-speed DFB laser chip, […]

10Gbps DML Module, Emcore or Agere 1861 Series, 1310nm, Direct ...

HBT10000 - mini
The 100Gbps Bit Error Ratio Tester (BERTWaveE425A) is a 4-lane and multi-rate high performance bit error analyzer. It provides 4-lane bit error test simultaneously, with each lane supporting multi -data-ratio from 10.3125Gbps to 28.05Gbps, and diverse code pattern. It also supports the user-defined code patterns, output signal amplitude adjustable, polarity […]

4x25Gpbs Bit Error Ratio Tester, BERTWave E425A, 25Gbps NRZ Data ...

t-mxh1-5-10pd-adc-overview2
10Gbps Intensity Modulator with the Features of Low Drive Voltage, RF VπVoltage 5.5V@10GHz, Typ. C and L-Band Operation Enhanced E/O Bandwidth for up to 12.5 Gb/s Modulation Speed Low Insertion Loss, 5.0dB Typ. High Extinction Ratio, 30dB Typ. Integrated Monitor Photodiode Available with Zero Chirp

10Gbps Intensity Modulator, Sumitomo T.MXH1.5-10PD-ADC

ftm7960ex-overview
This optical modulator is a Ti:LiNbO3 IQ/QAM Dual-Drive Mach-Zehnder modulator with modulation speed of up to 22.5Gbaud. Features Low Drive Voltage, RF VπVoltage 4.0V@40Gps, Typ. 40Gbps(22GBaud) Mach-Zehnder Modulator Using Ti-diffused LiNbO3 Waveguide Technology for QPSK/QAM Transmission Format. Separated DC Bias Port, Built-in Monitor Photodiode for Auto Bias Control Low Insertion Loss, […]

40Gbps IQ/QAM Modulator, Fujitsu FTM7960EX, Dual Drive QPSK Modulator

dp-qpsk-demodulator-overview
DP-QPSK Demodulator, Optoplex HB-C0GLCC018, 2×8 Coherent Mixer To be used for optical coherent detection such as DP-QPSK receivers, Optoplex’s ten-port 2×8 Coherent Mixer (aka QPSK mixer) combines the incoming signal with a local oscillator to generate eight light states in the complex-field space. The eight light output signals can then […]

DP-QPSK Demodulator, Optoplex HB-C0GLCC018, 2×8 Coherent Mixer

t-dkh1-5-40pd-adc
40Gbps Intensity Modulator with the Features of Low Drive Voltage, RF VπVoltage 4V@20GHz, Typ. at Single Drive Mode. C and L-Band Operation. Enhanced E/O Bandwidth for up to 40 Gb/s Modulation Speed Low Insertion Loss, 9.0dB Typ. Integrated Monitor Photodiode. Supports Both Dual-drive and Single-drive.

40Gbps Intensity Modulator, Sumitomo T.DKH1.5-40PD-ADC

dsc40s-overview
These high speed photodiodes are hermetically sealed, high reliability, low harmonic distortion photodiode modules designed for high optical power applications with typical bandwidths of 16GHz, respectively. The devices are well suited for receiver applications with optical pre-amplification, and are available with an internal 50 Ω termination. These photodiode modules are […]

16Ghz Analog PIN Photo-Detector, Discovery DSC40S, High Power Low Distortion