Electro-Optical Instrument

10G PIN-TIA PD -mini — DESCRIPTION The PIN-TIA (Trans-Impedance Amplifier ) Photo-Diode Receiver Module consists of a key Oclaro’s InGaAs PIN photodiode and a low-noise mid-gain limiting preamplifier in a hermetic package. Differential outputs are provided to improve noise rejection for enhanced performance. It has been optimized for use in 10Gb/s metro or long-haul applications, […]

10Gbps PIN-TIA Receiver, Fiber Coupled Photo-Detector

FIM24202mini — 40Gbps DQPSK Integrated Receiver, Fujitsu FIM24202, Fiber Coupled Module The Fujitsu FIM24202 DQPSK receiver integrates balanced PIN/TIA (Linear + AGC) photo receiver and DLI (Delay Line Interferometer) in one package, which make the module compact and cost-effective with excellent performances. The interior PLC Mach-Zehnder interferometer features push/pull drive of DLI […]

40Gbps DQPSK Integrated Receiver, Fujitsu FIM24202, Fiber Coupled Module

IQ EVB -mini — DESCRIPTION The IQ/QAM Transmitter is a high performance modulation evaluation unit that allows user to produce optical signals with complex modulation schemes (QPSK, QAM, OFDM). It integrates high bandwidth dual parallel Mach-Zehnder modulator and high speed RF drivers capable of dealing with data rate up to 56 Gbps. It features an […]

Single Polarization IQ/QAM Transmitter Evaluation Board, QPSK

DPIQ TX - mini — DESCRIPTION The dual polarization IQ/QAM Transmitter is a high performance modulation evaluation unit that allows user to produce optical signals with complex modulation schemes (PM-QPSK, QAM, OFDM). It integrates high bandwidth PM-QPSK modulator and high speed RF drivers capable of dealing with data rate up to 128 Gbps. It features […]

Dual Polarization IQ/QAM Transmitter Evaluation Board, PM-QPSK

Top -mini — DESCRIPTION The NRZ transmitter module consists of InP Mach Zehnder Modulator and conventional Distributed Feed-Back (DFB) laser. The modulation signal is applied to the integrated MZM modulator while the laser works in CW mode. The internal thermal and power control make the wavelength and optical power highly stable. And non-drifting […]

40Gbps InP MZM Transimitter, NRZ, 1550nm

Tunable Laser Display - Resize — Wavelength Tunable Light Source, 50GHz/0.4nm Interval, C or L Band ITU Grid, 20mW, PM Fiber The Light Source is a Fiber coupled diode Laser of standard ITU DWDM wavelength with Min.0.4nm/50GHz channel interval and 20mW PM optical power output . C and L band are both optional. It suits well […]

ITU Grid Tunable Laser Module, C Band or L Band, ...

Tunable Laser Display - Resize — Continuous Tunable Laser Module, C Band or L Band, 1pm Resolution, High Power and Stability The Continuous Tunable Laser module is a high performance continuous wave (CW) and continuous wavelength tunable laser source for use in the C or L band window covering 1527nm to 1608nm. It features ultra high […]

Continuous Tunable Laser Module, C Band or L Band, 1pm ...

DML Module mini — 10GHz Directly Modulated Laser Module, 1550 or 1310nm, DML The directly-modulated laser (DML) is a cost-effective solution for 10Gbps digital transmission of up to 60 km using traditional intra-city SMF-28 single-mode fiber links. Or It is also suited for analog fiber transmission. The package contains a high-speed DFB laser chip, […]

10GHz Directly Modulated Laser Module, 1550 or 1310nm, DML

NL Laser — DESCRIPTION The narrow line width module is compact laser modules employing the high-performance compact Distributed Bragg Reflection (DBR) Cavity Fiber Laser, which features mode-hop free and very narrow linewidth. It provides a stable, easy-to-use, low cost alternative to other ECL lasers. The module uses reliable, qualified and industry proven components, […]

Narrow Linewidth Laser, 1k~3kHz, 20~500mW, C band ITU Grid, Low ...

20180408_181939 - Copy — DESCRIPTION The modulator integrated DFB module consists of electro-absorption modulator and conventional Distributed Feed-Back (DFB) laser. The modulation signal is applied to the modulator section while the laser section operates CW allowing extremely low wavelength chirping. The module includes an optical isolator, monitor photodiode, thermistor and a thermo-electric cooler. FEATURES […]

40G~10Gbps Electro-Absorption Modulated Laser Module, EAM-DFB Laser

AT10GC-2 — The Avalanche Photo-Diode Receiver Evaluation Board consists of a key avalanche photo-receiver, AT10GC, which integrate a low-noise preamplifier and a precision NTC thermistor in a hermetic coplanar package. Differential outputs are provided to improve noise rejection for enhanced sensitivity. It has been optimized for use in 10Gb/s metro applications, using […]

APD Receiver Evaluation Board, Avalanche Photo-Diode, C&L Band, 10Gbps

Adapter — DP-QPSK 40 / 100 Gbps Coherent Receiver Evaluation Kit, ICR-100-EVK General Description The ICR-100-EVK is an O/E evaluation kit designed to convert QPSK / PM-QPSK / BPSK / QAM (16QAM, 64QAM)optical data to differential electrical signals. It consists of coherent receiver (Fujitsu FIM24706/301), daughter adapter board, and mother power and control […]

100Gbps Coherent Receiver Evaluation Kit, ICR-100-EVK, Fujitsu FIM24706, EVB

20180408_181413 - Copy — DESCRIPTION The Module is a photodiode module designed for RF over Fiber, and broadband RF transmission or digital telecommunication using single mode optical fiber. The module utilizes a high input power, low distortion PIN photodiode that provides optical to RF conversion out to the frequency range beyond 40 GHz. This […]

40~10GHz Photo-diode Module, Analog PIN Receiver, C, L & O ...

BPD Module2 — DESCRIPTION The balanced receiver module is ideally suited for a variety of applications up to 43 Gbps such as D/BPSK, D/QPSK and . The module consists of a pair of balanced photodiodes and a high-gain limiting transimpedance amplifier. The module has a typical conversion gain of 1200 V/W. Its dynamic […]

40Gbps Balanced Photo-Diode Receiver Module, C, L & O band

20180103_170309 — DESCRIPTION The high speed photo-receiver receiver evaluation board consist of the key module, MPRV133xA, which is a differential front-end with high differential gain and a typical bandwidth of 36GHz.The photo-receiver module contains waveguide-integrated PIN photodiode (PD) and a single chip and limiting amplifier (LA) with limiting output buffer. The incorporated […]

40Gbps U2T/Finisar Photoreceiver / Photodetector Evaluation Board O, C/L Band

Pump Light Source — DESCRIPTION The Pump laser source adopts the butterfly packaged LD with wavelength-stabilized FBG to achieve the stable wavelength and output power. And It also offers a special protection against optical damage caused by ASE return. The keys and display integrated in the front panel make it very easy of use […]

Pump Laser Source, 974/976nm, Bench-top or Module

EDFA - Bench-top — DESCRIPTION The EDFA adopts unique design to produce maximum signal gain and saturated output power while maintaining low noise figure, enabling test capabilities in system or component level manufacturing and characterization, as well as facilitating highly demanding R&D applications. The turnkey bench-top unit incorporates an user-friendly front panel housing with […]

Erbium-Doped Fiber Amplifier, C-band EDFA, Flatten Gain

LAN-WDM - mini — DESCRIPTION The LAN-WDM Laser source consists of four wavelengths: 1295.56, 1300.05, 1304.58, and 1309.14 nm. Wavelength is temperature stabilized. The DFB LAN-WDM Laser source assists in the development and manufacturing of active or passive LAN WDM devices for LR and ER interconnect transmission using PAM4 for 100 Gigabit Ethernet (GbE), […]

LAN WDM Laser Source, 1295/1300/1304/1309nm, DFB

BPRV212xA-2 — The balanced photo-receiver receiver evaluation board consist of the key module, BPRV212x(A), which is a differential front-end for 43Gbits/s DPSK-applications featuring high differential gain. The photo-receiver module contains two waveguide-integrated PIN photodiode (PD) and a single chip and limiting amplifier (LA) within one small form factor SMD-package. The Receiver is […]

Balanced Photo-Diode Receiver Evaluation Board, C&L band, 40Gbps

EAM Laser Transmitter-1 — The EML (Electro-absorption Modulated Laser) transmitter evaluation board consists of a conventional Distributed Feed-Back (DFB) laser and EA modulator. The modulation signal is applied to the modulator section while the laser section operates CW allowing extremely low wavelength chirping. The module includes an optical isolator, monitor photodiode, thermistor and a […]

EML Optical Transmitter, 10G/40Gbps Electro-absorption Modulated Laser